Hei.
Nurkassa pyörii Ford Focus st170 2.0l moottori. Kone on käytännössä muuttuva imunokkanen Zetec. Tarkoituksena olisi laittaa koneeseen säädettävä moottorin ohjaus. Moottrissa on säädettävä nokka-akselin ajoitus VCT joka säätää nokkaa öljyventtiilin avulla.
Onko Megalla mahdollista toteuttaa nokan säätö ja jos voi niin mistä löytyy siihen ohjeet?
Kiitos.
Ford Focus st170
Moderator: Masi_K
Re: Ford Focus st170
http://msextra.com/doc/ms3/vvt.html
On/Off säätö onnistuu helposti jo MS1 ohjaimellakin. Öljyventtiilin PWM säätö, vaatii MS2 tai MS3 ohjaimen.
ST170 moottorin nokka-akselia ohjataan alunperin portaattomasti.
<clip>
Variable camshaft timing (VCT)
The camshaft adjustment is map-controlled, but also responds to mass air flow, intake air temperature and coolant temperature via the PCM.
The solenoid valve is supplied with voltage pulses from the PCM that determine the required current
</clip>
Nokan kulma-aseman mittaus alkuperäisellä anturoinnilla.
http://www.msextra.com/forums/viewtopic ... 31&t=40336
On/Off säätö onnistuu helposti jo MS1 ohjaimellakin. Öljyventtiilin PWM säätö, vaatii MS2 tai MS3 ohjaimen.
ST170 moottorin nokka-akselia ohjataan alunperin portaattomasti.
<clip>
Variable camshaft timing (VCT)
The camshaft adjustment is map-controlled, but also responds to mass air flow, intake air temperature and coolant temperature via the PCM.
The solenoid valve is supplied with voltage pulses from the PCM that determine the required current
</clip>
Nokan kulma-aseman mittaus alkuperäisellä anturoinnilla.
http://www.msextra.com/forums/viewtopic ... 31&t=40336